How to Repair Your Damaged Metal Gate in Houston Like a Pro?

You own a home in Houston and realize that your metal gate is no longer as beautiful or functional as before perhaps it is high time to start fixing it up. It doesn’t matter how damaged your metal gate is corroded posts, broken metal, or a concrete problem metal gate repair is very much possible. That being said, you should analyze a detailed and professional approach used by the Houston Gate Repairs team so that you can achieve the best results. 

Well, how can you repair your metal gate like a doctor? Here they are, and I’ll give an example of how it would look if Houston Gate Repairs were the ones handling it!

What Metal Gate Owners Struggle With Most?

Following are the common problems many homeowners face with their metal gates, and Houston Gate Repair shows you the best ways to repair them. Here are the key issues:

• Corroded Posts: Rust and weathering weaken the posts, causing instability.
• Deteriorating Concrete Footings: Worn out footings make the posts less secure.
• Misaligned and Uneven Posts: Shifting posts made the gate difficult to operate.
• Rusting Gate Components: Parts like square tubing and hinges get rusted and need replacing.
• Improper Gate Height: Uneven post heights cause the gate to sit incorrectly.

These problems are common due to Houston’s humid climate, frequent rain, and salty air, which accelerate rusting and corrosion. Professional repairs are essential to restore the gate’s stability and extend its lifespan.

How to Get Your Metal Gate Repaired in Houston? 

Of course, the best option is to turn to professionals, like us at Houston Gate Repairs. Repairing your metal gate in Houston isn’t as simple as it looks; it takes time, skill, and experience. If you believe you can do it and want to try, we’re here to help you learn the proper way! We will guide you step by step using our proven ways, so you can fix it yourself. Just remember, if you need help, we’re always here for you!

Step 1: Check the Damage and Get the Area Ready

First, check how much damage there is. Are the posts rusty or corroded at the bottom? Is the gate broken, or has it just come off the hinges? In our recent experience with the client, the gate owner didn’t want to connect the fence to the house, so the expert decided to strengthen the base instead.

Pro Tip By Our Experts

If you’re not sure where to start, we suggest you clear out the area surrounding the posts. This makes it easier to check the damage, dig holes, and prepare for repairs. You’ll need a good posthole digger and possibly a shovel to clear the ground for new concrete footing.

Once you’ve cleared the area, you’ll have a better view of the existing concrete footing. You must decide whether to work with these or pour new ones entirely. If the existing ones are connected to your home’s foundation or a brick wall, it’s often best to leave them in place and work around them. This is exactly what our experts at Houston Gate Repair did to the client when our client decided not to remove the old footings but instead build on top of them.

Step 2: Clean Up Corroded Posts and Prepare for New Footings

Once you’ve exposed the damaged area, it’s time to clean things up. For example, when you clear away the rusted posts, use a grinder to get rid of the rust and oxidation. This makes it easy to change out parts like the metal tubes or posts that are weak. Moreover, use plywood to briefly raise the posts to the correct height so that everything will be aligned properly.

Our professionals take great care in metal gate repair in Houston, TX. It’s not only about cleaning; it’s about creating a solid base for the new materials.  If you lack the right tools or knowledge, feel free to contact a professional at Houston Gate Repairs. We will ensure that the base and posts are properly lined up before proceeding.

Step 3: Raise the Post to the Correct Height

Now that you have done your cleaning and exposed the corroded parts of your post, the next step is to level your posts. In the case of our clients, we raised the post using the car jack and then supported it using some wooden blocks. This is a creative method, but it’s essential to get the height just right so the gate will sit properly when it’s reattached.

Always double check your measurements before raising the posts. The last thing you want is for your metal gate to be uneven after everything is put back together.

Step 4: Replace Corroded Parts with Fresh Square Tubing

Now things might get a little complicated. If your metal gate posts are rusted at the bottom, you can usually fix this by replacing the old sections with new metal. For our client, we removed the rusty parts and put in new square tubing to make it stronger and more stable.

At Houston Gate Repairs, we suggest using strong, rust resistant materials to prevent future damage. The new tubing should be welded on, and to make it more stable, you must put an extra piece of square tubing in the center of the gate. This will be a strong decision because the metal in that area is weak, and the extra support will help the gate last longer.

Step 5: Prepare and Pour the Concrete Footings

Now that the posts and tubing are set up, it’s time to pour the concrete footing. This part is critical without solid footings, your gate won’t stand the test of time.

Houston Gate Repairs suggests prepping the area with a board to act as a mold for the concrete. That’s why before pouring, you should blow the surface so there are no small particles of dust or any kind of debris on the surface. After that, prepare your concrete mix accurately, and then pour the concrete mix gently into the mold. In our client’s case, we used a thin scrap board; however, a thicker piece of wood or a 2 x 4 depending on the size of the hole can also be used.

It’s important to allow the concrete to set properly. Houston Gate Repairs always recommends covering the area if it’s been raining, as moisture can affect the concrete curing process. If you don’t have time to wait, we can help with faster drying methods and make sure everything sets perfectly.

Step 6: Reassemble the Gate and Test the Stability

Once the concrete has dried and become hard, you can reassemble the gate back together. Reattach the freshly repaired posts and check for proper alignment. Make sure the gate is level by using a tool to measure the posts and changes.

This is the spot to check everything again. Ensure the gate opens and closes easily and that the posts are safely buried in the ground. You definitely don’t want your gate to droop or shake after it’s repaired.

At Houston Gate Repairs, we make sure to ensure we leave you not only with a well-functioning gate but a lasting one. This means that our team spends a lot of time doing the work and making sure that nothing is missed before labeling it complete.

Do You Need Professional Help in Your Metal Gate Repair?

Even though fixing something on your own is cost-effective, only a professional team like Houston Gate Repairs will suffice. If you have metal gates that need serious work, we are here to assist you with fast and quality services. Whether it is worn out due to rust, a crack, or bent, we have a clear picture of the sort of treatment your gate requires to get back on full operational time.

We take care of all the hustles so you won’t have to! Our team specializes in:

• Metal gate repairs of all sizes
• Concrete footing installations
• Post replacements and more!

Are you ready to get your gate to that new look? Call Houston Gate Repairs today for a friendly service that is quick and guaranteed to meet your needs. With our service, your metal gate will be up and running perfectly, giving you the security and convenience you need.