Houston Gate Repair | Emergency Gate Repair & Installation Company
Licensed Repair for Humming, Dead, Slow or Stuck Gate Motors
Gate motor humming but not moving, silent, or stalling halfway? We provide gate motor repair in Houston for swing, sliding and driveway gates, residential and commercial. We’re licensed, we offer same-day and 24-hour service, and the estimate is free. We find what’s actually failing, whether it’s the motor, capacitor, control board, drive or wiring, so you only pay to fix the real problem.
Free Estimates. Tell us what your gate motor is doing and we’ll lay out the repair and replacement options for your gate.
Same-Day Repair. Licensed gate repair for humming, dead, slow or stuck motors on residential and commercial gates across Houston.
A Humming Motor Isn’t Always a Bad Motor
A gate motor that hums, clicks or won’t move isn’t always a failed motor. The cause can be a worn capacitor, a damaged control board, corroded wiring, a weak battery, or a gate that’s dragging in its track. Houston’s humidity, summer heat, storm surges and shifting clay soil put every one of those parts under stress, so the repair starts with finding out which one actually failed.
We’re licensed, and we offer same-day and 24-hour gate motor repair for residential and commercial gates across Houston. The estimate is free, and it lays out your options: repair the motor, or replace the operator when the unit is too old to repair safely.
GET YOUR FREE ESTIMATEGate Stuck Open or Locked Shut After a Storm? Call Us Now.
A storm or power surge can kill a gate motor in an instant. The control board burns out, the motor stops responding, and the gate is left stuck open with your property exposed, or locked shut with your car on the wrong side. Heavy rain can do the same through water in the motor housing, wiring and sensors. We inspect the whole system, find what failed, and explain whether the motor can be repaired or the operator needs replacing.
Call as soon as it’s safe. We offer same-day and 24-hour gate motor repair, and the estimate is free. If you need the gate moved in the meantime, ask us how to use the manual release safely.
CALL FOR EMERGENCY REPAIR
Sliding, Swing and Commercial Gate Motors Repaired in Houston, TX
A gate motor is one part of a system that also includes the gate, the track or hinges, the control board, the sensors and the power supply. Pick your type of gate below to see how we diagnose and repair it.
A sliding gate operator pulls a heavy gate along its track every day, so the motor, drive wheel, gear rack and limit settings wear together. When the motor hums but the gate won’t move, the cause is often a stripped gear, a worn drive, a track packed with debris, or a failed capacitor or control board rather than the motor itself.
We check that the gate rolls freely by hand before we touch the motor, because a dragging gate will burn out a healthy one. If your gate keeps coming off its track, read about a sliding gate jumping off track or call us to have it inspected.
FIX MY SLIDING GATE MOTOR
Swing gate operators use arms or underground units to push each leaf open and closed. A motor that strains and stops, an arm that has lost its bracket alignment, a leaf that sags and overloads the operator, or a battery that no longer holds a charge are the usual causes. Our automatic gate repair service covers the whole system.
Houston’s shifting clay soil can pull gate posts out of plumb, which makes a swing gate harder to move and puts extra load on the motor. We check the hinges and post alignment before blaming the operator, so you don’t replace a motor that was only fighting a crooked gate.
FIX MY SWING GATE
Apartment communities, warehouses and business entrances cycle their gate motors dozens of times a day, and a motor that fails stops deliveries, residents and customers. Our commercial gate repair covers sliding, swing and barrier arm operators.
We test the motor together with the loops, sensors and access control that feed it, since a bad loop or keypad can look like a dead motor. Same-day service is available, so your entrance is back in operation as soon as possible.
REQUEST COMMERCIAL MOTOR REPAIR
Many gate motors that look dead are fine. The control board, safety sensors, limit switches, power supply or wiring has failed, and humidity, water intrusion and power surges are common causes in Houston. Our gate opener repair tests each part before we replace anything.
We service LiftMaster, DoorKing, Viking, BFT, Nice, FAAC, Elite, Mighty Mule, Apollo, US Automatic and Ghost Controls. Not sure what’s wrong? Start with our guide to an electric gate motor that isn’t working.
BOOK BOARD & SENSOR REPAIR
Some motors aren’t worth another repair. Parts that are no longer made, repeated failures, a burnt-out motor, or an older operator that can’t take current UL 325 safety devices all point toward replacement. We give you the repair cost and the replacement cost, so you can choose.
If the operator is fine but the gate itself is worn out, ask us about gate replacement or a new gate installation with a matched operator.
COMPARE REPAIR VS. REPLACE
A gate motor can often be repaired for far less than the cost of a new operator, but not always. The decision comes down to the motor’s age, whether parts are still available, whether it meets current safety standards, and how often it has failed.
If the motor is still within its working life, parts are available and the problem is a worn component, repair is usually the better value. A new capacitor, control board, limit switch, gear or battery often brings the operator back to normal for much less than a new unit. A gate that stopped after a storm or power surge, or a remote that stopped responding, often points to one failed part rather than a failed motor.
Replace the operator when the motor is burnt out, the gearbox is damaged, parts are no longer made, or the same unit keeps failing. An older operator that can’t be fitted with today’s UL 325 entrapment protection is also a reason to replace it, because a vehicle gate shouldn’t stay in service without it. We give you the repair cost and the replacement cost side by side, so you can see which one makes sense.
A motor that struggles is often fighting a gate that drags. Sagging hinges, a dirty track or worn rollers can overload a good operator, and a new motor won’t fix that. We check how the gate moves first, and our gate repair service covers the frame, hinges and track if that’s where the problem is. For budgeting, see our gate repair cost guide .
We Fix the Cause, Not Just the Symptom
A motor that hums or won’t move can have half a dozen causes, and guessing gets expensive. We test before we replace, explain what failed in plain English, and give you a free estimate so you can decide with the facts.
Gate stuck open or locked shut? Call us for same-day gate motor repair, with 24-hour service when the problem can’t wait.
We check the motor, capacitor, control board, sensors, wiring and power supply in turn, so you don’t pay for parts that weren’t the problem.
You get a free estimate that explains what failed and what your repair options are, so nothing is a surprise.
If the operator is too old to repair safely or parts are no longer available, we’ll say so instead of selling you another repair.
We’re licensed, and we’re glad to answer your questions about the work before anything starts.
Humidity, summer heat, storm surges and shifting clay soil are hard on gate motors. We look for corrosion, water damage, surge damage and post movement, not just the motor.
Driveway gates for homes, entrances for HOAs and apartment communities, and gates for warehouses, parking lots and industrial sites.
We service LiftMaster, DoorKing, Viking, BFT, Nice, FAAC, Elite, Mighty Mule, Apollo, US Automatic and Ghost Controls.
From Your First Call to a Gate That Opens Again
Call (512) 957-4708 or send a request and tell us what the motor is doing. Humming, clicking, silent, or stopping halfway? Tell us your gate type and opener brand if you know it, and send a photo of the motor label if you can. It helps the technician arrive prepared.
Our technician checks that the gate moves freely, then tests the motor, capacitor, control board, sensors, limit settings, and power supply to find what actually failed. You get a free estimate with your repair and replacement options before any work starts.
Once you approve the estimate, we repair or replace the failed parts, then run the gate through full open-and-close cycles. We check the limits, travel, and safety sensors, and walk you through how everything works before we leave.
Gate motor not working right now? Call us and we’ll get you on the schedule.
Gate Motor Repair Near You, From Cypress to League City
We repair gate motors for homeowners, HOAs, and businesses across Greater Houston. If your motor is humming, dead, or stuck, tell us your address and we’ll confirm coverage and the earliest visit we can offer.
Houston’s humidity, summer heat, and storm surges are hard on gate motors. Moisture gets into control boards, heat wears out capacitors and batteries, and power surges burn out electronics. Wherever you are in the Houston area, we look for the damage those conditions cause.
We also serve Magnolia, Conroe, Katy, Kingwood, Tomball, Baytown, Friendswood, Missouri City, Richmond, Atascocita, Houston Heights, Memorial, River Oaks, Bellaire, and West University Place. Don't see your neighborhood? Call us and we'll confirm coverage for your address.
CHECK SERVICE AVAILABILITYWhat to Ask Before Anyone Touches Your Gate Motor
The cheapest quote often replaces the most parts. A company that swaps in a new motor without testing may fix nothing, and a gate that’s repaired wrong tends to fail again. These questions separate technicians who diagnose from those who guess.
At Houston Gate Repair, we inspect the gate and the motor, explain what we find, and give you repair and replacement options with a free estimate before you decide.
GET YOUR FREE ESTIMATE
Tell Us What Your Gate Motor Is Doing
Gate motor humming, clicking, dead, or stuck? Tell us your gate type, your opener brand if you know it, and your Houston-area location. We’ll review your request and follow up with the next steps for your free estimate.
Complete the form below and our service team will review your gate motor repair request.
