How Can We Help You Repair Your Sagging Gate and Fence? 

Is your gate and fence sagging, wobbling, or squeaking like an old door? 

At Houston Gate Repair, we do not only install gates or repair gates and fences, but rather, our work approach is strictly to deal with any challenge. 

No matter whether it is the gate that sags in the middle, the post that bounces to and fro, or the lattice that irritates as it has become loose we are ready to fix it. Today we decided to show you how we helped one of the clients deal with several popular problems associated with gates. If you have such a situation, you will need to read the blog further to find out how we can assist you with Houston gate and fence repair.

The Challenge Of A Sagging Gate and Wobbly Post

When we first arrived at the job, our client Matt had a couple of issues with his gate and fence. Here’s what we found:

• Sagging Gate: The gate had clearly settled over time and was no longer square.
• Wobbly Post: One of the fence posts was loose, making the entire gate feel unsteady.
• Loose Lattice and Missing Cap: The latticework was coming loose, and the cap was falling off.

Our client was worried we’d have to replace the post. But we told him, ‘Don’t worry! With the right fix, we can save the post and get the gate working without it costing too much.’

How We Diagnosed and Fixed the Problems

Here’s how we approached the repair, step by step:

1. Inspect the Post

We started by examining the post, which had a small rut below ground level. It was a little worn but still solid enough to work with. We told our client that replacing the post wasn’t necessary just yet. Instead, we could stiffen it up, giving the fence at least 8-10 more years of life much more cost-effective than replacing the entire fence.

2. Set the Post in Place

After digging down to get a better look, we stabilized the post by securing it with a scrap piece of wood and a stake in the ground. Instead of using concrete or gravel, we opted for a two part expanding foam. This foam hardens and secures the post in place in about 1-2 hours, depending on the temperature.

3. Fix the Sagging Gate

Next, we turned our attention to the gate. It wasn’t square anymore this is a common issue with gates that sag over time. We used a framing square to check the measurements and confirmed that the gate had shifted out of alignment.

4. Measure the Diagonals

We measured diagonally to make sure the gate was perfectly square. The numbers were off by just half an inch, meaning one side of the gate had sagged slightly.

To fix the sag, we used a clamp and a couple of custom made blocks to pull the gate back into position without damaging the wood.

5. Add Stability to the Gate

Once the gate was square again, we reinforced it with some custom made brackets. These brackets not only added strength and stability to the gate but also blended seamlessly with the wood, so they won’t be noticeable once they weather and blend into the fence.

While the foam was setting, we tightened the lattice with quarter crown staples and reattached the cap to the post. Once everything was secure, we covered the foam with soil to give it a clean, finished look.

The Outcome was a Stronger and Longer-Lasting Gate

After a couple of hours of work, we had the post stiffened, the gate straightened, and everything looking as good as new. Matt was thrilled with the results:

• Gate: No more sagging, fully aligned, and operating smoothly.
• Post: Solid and sturdy, with the foam ensuring it stays in place for years to come.
• Fence: The loose lattice was fixed and the cap was securely reattached.

Many features that impressed our client include the extra stability provided by the specially designed brackets. Besides, they served a construction function, which was very helpful, as the additional elements contributed to the pleasant appearance of the gate as well. In the long run, they’ll be coated with the fence and you won’t distinguish them as different from the actual structure that surrounds the fence.

Why Work with Houston Gate Repairs for Fixing Your Fence and Gates? 

From a wobbly post to a drooping gate, we are here to help you. Houston Gate Repairs is a company that deals with all kinds of gate and fence issues with an emphasis on repair, servicing, installation, and painting. Here’s why our clients trust us:

• Expert Diagnosis: We first exhaustively analyze the situation before coming up with the solution.

• Cost-Effective Repairs: If it is possible, we search for an opportunity to fix and restore the appeal of the gate or fence before advising clients on replacement.

• Attention to Detail: From the type of brackets used in the structure to measurement and other factors, we ensure they are well done.

If you have a similar concern, say the gates are sagging, the posts are wobbling, or just about anything, we are here to help. We will treat it with the same professionalism and expertise with which we handled our client’s job for him.

Ready To Fix Your Gate?

If you are having issues with your gate or fence, Houston Gate Repairs is here to help. Save with our discounted prices. Call now to schedule an inspection or repair. Our expert staff is eager to bring your gate back to effective shape, so you can stop fretting about sagging, wobbling and other gate issues!

Ever had a gate or fence problem that needs some repair? Don’t let it turn into a major problem—Give Houston Gate Repairs a call now and we will do all the work for you!